BAY Creations 3D
Husqvarna-Viking-Pfaff Embroidery Hoop Storage - Wall-Mount (25 Colors!)
Husqvarna-Viking-Pfaff Embroidery Hoop Storage - Wall-Mount (25 Colors!)
Couldn't load pickup availability
Husqvarna-Viking-Pfaff Embroidery Hoop Wall-Mount Storage (Hoops NOT included)
This wall-mounted storage rack holds 5 Embroidery Hoops while only extending out 4.25" from the wall. It is about 5" wide and 2.5" tall when empty. It is compatible with Embroidery Hoops for "Group 7" Husqvarna/Viking and Pfaff sewing machines (a list is at the end of this listing). See the picture of the hoop connectors to make sure your hoops will fit.
This unit is designed to be mounted to a wall using two #8 screws which are located 3.5" apart. Ideally, the right screw should go into a stud with the left using a drywall anchor, but it can be mounted using two anchors (2 screws and anchors are included). I DO NOT recommend using double-stick tape to mount this as it can get very heavy when holding larger hoops or any magnetic hoops.
Once the storage rack is mounted, the side of the hoop that clips onto the embroidery machine just slips into a slot from the top with the top of the hoop facing out. Each slot is accessible, even if slots in front are occupied, so each of the hoops stored can be removed and replaced without disturbing any of the other hoops.
This storage rack is available in 24 solid covers and with a Rainbow coloration (+$10). The available colors are shown using Knob and Bobbin Winder protectors as examples. Note that different Rainbow units may have different colors with different width bands as the multicolored filament used has many variations, so it is unlikely that two units will be identical. The rainbow unit shown in the picture is of a different product but is included as an example of the Rainbow Coloration.
All of the parts in my shop are designed by me using CAD software and made to order in wide variety of colors using my own 3D printer. 3D printed parts may have lines or other visible surface features which are not defects, but are a normal part of the 3D printing process. The PLA plastic used for this part is not suitable for outdoor use and may soften at temperatures above 120 degrees Fahrenheit.
Hoops for the following machines should fit in this rack:
HUSQVARNA/VIKING: Brilliance 75Q, Designer 1, Designer 2, Designer Diamond, Designer Diamond Royale, Designer Diamond deLuxe, Designer Ruby, Designer Ruby Royale, Designer Ruby deLuxe, Designer SE, Designer Sapphire 85, Designer Topaz 20, Designer Topaz 25, Designer Topaz 30, Designer Topaz 40, Designer Topaz 50, Eden Rose 250C, Opal 690Q, Quilt Designer, Quilt Designer 2, Sapphire 830, Sapphire 835, Sapphire 855, Sapphire 870 Quilt, Sapphire 875 Quilt, Sapphire 930, Sapphire 960Q, Tribute 140C
PFAFF: Creative Icon 2, Icon, Creative Sensation, Pro, Pro II, Vision, Performance, 4.5, 4.0, 3.0, 2.0
