Brother - Baby Lock Embroidery Hoop Storage - Wall Mount (25 Colors!)

Brother or Baby Lock Embroidery Hoop Tabletop Storage (Hoops NOT included) FOR SLIDE-IN Hoops Only! If your hoop has a metal bracket to attach to your embroidery module, YOUR HOOPS WILL NOT FIT THIS RACK. See the picture for the type of hoops that will fit. This tabletop storage rack holds 5 slide-in style Brother or Baby Lock Embroidery Hoops and is 4.5" wide, 5" deep, and 2.5" tall when empty. The 5 hoop positions are spaced 7/8" apart. It is compatible with embroidery hoops for a wide range of Brother and Baby Lock machines including Brother Innovis models and Baby Lock Destiny, Aventura, Aerial, Esante, Ellageo Plus, Ellegante, Ellisimo, Flourish, Flare, Journey, Meridian, Pathfinder, Solaris, Spirit, Unity, and Vesta. If your hoop slides into your embroidery module from the front, not from the top, then your hoops will probably fit. This unit is designed to be mounted to a wall using two #8 screws which are located 2.5" apart. Ideally, the right screw should go into a stud with the left using a drywall anchor, but it can be mounted using two anchors (2 screws and anchors are included). It does require a screwdriver with a shank that is at least 5 inches long to access the left screw. I DO NOT recommend using double-stick tape to mount this as it can get very heavy when holding larger hoops or any magnetic hoops. Once the storage rack is mounted, the side of the hoop that clips onto the embroidery machine just slips into a slot from the top with the top of the hoop facing out. Each slot is accessible, even if slots in front are occupied, so each of the hoops stored can be removed and replaced without disturbing any of the other hoops. This storage rack is available in 24 solid covers and with a Rainbow coloration (+$10). The available colors are shown using Knob and Bobbin Winder protectors as examples, but are NOT included with this products, although they are available for purchase in other listings in my Etsy Shop. Note that different Rainbow units may have different colors with different width bands as the multicolored filament used has many variations, so it is unlikely that two units will be identical. The rainbow unit shown in the picture is of a different product but is included as an example of the Rainbow Coloration. All of the parts in my shop are designed by me using CAD software and made to order in wide variety of colors using my own 3D printer. 3D printed parts may have lines or other visible surface features which are not defects, but are a normal part of the 3D printing process. The PLA plastic used for this part is not suitable for outdoor use and may soften at temperatures above 120 degrees Fahrenheit.