Bernina Embroidery Hoop Storage - Wall Mount (25 Colors!)

Bernina Embroidery Hoop Storage Rack (Hoops NOT included) These wall-mounted storage racks hold Bernina Embroidery Hoops and are compatible with all current Embroidery Hoops for Bernina machines EXCEPT the Large Freearm Hoop. They work with the standard hoops that are shipped with Bernina Embroidery machines (Large Oval, Small, and Medium), Giant, Mega, Jumbo, Maxi, and Midi Hoops, the Magnetic Hoops, and even the Clamp Hoops (although you may need to remove or reposition some of the clamps to fit). Neither model been tested with hoops for Artista models or other brands of machines, including Bernette, and will probably not work with them. If you have one of the other two Brother-BabyLock attachment mechanisms, let me know if you are interested in a wall-mount storage solution as I will consider making products for them if there is enough interest. There are two models. The Full-Width Spacing model has 4 slots with 1.5" spacing to allow the large ratcheting knob on the Giant, Jumbo, Maxi, and Midi Hoops to fit without interfering with an adjacent slot. It sticks out from the wall 6.38" and is 5" wide and 3" tall. The Narrow model staggers its 5 slots so it can hold 5 hoops but if you have multiple hoops with the large ratcheting knob, the knobs may interfere with their neighboring hoops. It sticks out from the wall 5" and is 4.5" wide and 2.5" tall. Both models are designed to be mounted to a wall using two #8 screws which are located 2.5" apart for the 5 slot model and 3.5" apart for the 4 slot model. Ideally, the left screw should go into a stud with the right using a drywall anchor, but it can be mounted using two anchors (2 screws and anchors are included). It does require a screwdriver with a shank that is at least 5 inches long to access the right screw on the 5-slot model. I DO NOT recommend using double-stick tape to mount this as it can get very heavy when holding larger hoops or any magnetic hoops. Once the storage rack is mounted, the side of the hoop that clips onto the embroidery machine just slips into a slot from the top with the top of the hoop facing out. Each slot is accessible, even if slots in front are occupied, so each of the hoops stored can be removed and replaced without disturbing any of the other hoops. This storage rack is available in 24 solid covers and with a Rainbow coloration (+$10). The available colors are shown using Knob and Bobbin Winder protectors as examples, but are NOT included with this products, although they are available for purchase in other listings in my Etsy Shop. Note that different Rainbow units may have different colors and which may be in different colors with different width bands as the multicolored filament used has many variations, so it is unlikely that two units will be identical. All of the parts in my shop are designed by me using CAD software and made to order in wide variety of colors using my own 3D printer. 3D printed parts may have lines or other visible surface features which are not defects, but are a normal part of the 3D printing process. The PLA plastic used for this part is not suitable for outdoor use and may soften at temperatures above 120 degrees Fahrenheit.